WENZHOU JUNKE ELECTRIC CO., LTD.  

Product Name: Outdoor Type 400V 200kvar Power Capcitor Correction Device Model NO.: DGAC-200KVAR Filter: Composite Paper Capacitor Tuning: Polystyrene Capacitor Usage: Low Frequency Coupling, Tuning, Filter, Low Frequency Bypass Electrolyte: Electrolytic Manufacturing Material: Polypropylene Structure: Fixed Capacitor Capacitance: 50-100uf Packaging Type: Surface Mount Application: General Purpose, Power Type: Polypropylene Capacitor Compensate: Reactive Energy Power Transformer: Prove Transmission Power Factor Using Range: Motor or Inductive Power Power Supply: only Supply Reactive for Load Warranty: 2 Years Di Electrical: 50 Degree Solid Wax Anti Explosion: Explosion Device Inside Release Electricity Time: Release Electricity Time Protect Power: AC Contactor Trademark: OEM Transport Package: Wooden Specification: CE ROHS Origin: Zhejiang Yueqing HS Code: 85321000 Product Description outdoor type 400V 200kvar power capcitor correction deviceAn optimally designed power factor correction system saves money and increases the utilization of the electrical infrastructure.What is Reactive Power and Power Factor CorrectionAll electrical loads with a magnetic circuit like motors, ballasts for lamps, transformers and pumps require reactive power to build up the magnetic field. The reactive power for the magnetic field has to be provided by the utility same as for active power, even though that type of energy is to the end user of little value. The reactive power oscillates with double the line frequency between supplier and end user (Power Oscillation) and causes losses. The phase shift of apparent power to active power is reactive power. The power factor correction compensates the consumed reactive power where it is used with a power factor correction system.Why do I need Power Factor CorrectionWhen the electrical network is loaded with reactive power, less active power can be transmitted or used. The reactive power leads to a higher current and to higher transmission losses.The non usable reactive energy has to be provided by the utility at a cost. 40 to 50% of the consumed active power in the form of reactive power is usually not charged to the end user by the electricity provider. The excess consumption of reactive power will have to be paid for and is shown on the electrical utility bill.How can Reactive Power be reduced or eliminatedPower factor correction systems can be installed to avoid the unnecessary cost of paying for reactive energy. Power factor compensation systems provide the capacitive power to eliminate reactive power that is inductive. With a PFC (Power Factor Correction) correctly designed is the phase shift Cosine φ between 0.9 and 0.99 inductive at the point of common coupling (Point where the responsibility changes from utility to end user). This way the grid and end user infrastructure is not unnecessary charged with oscillating reactive power.The correct size of the PFC system can be obtained from the electrical utility bill or measured on site. Ourcalculation toolhelps you to size the PFC.Cost and Benefit Analysis of Power Factor CorrectionThe pay back of power factor correction depends on how high the charge for reactive power is on the utility bill in your company. The pay back can be calculated with the electrical utility bill. Eliminated reactive power cost helps you to become more competitive and reduce sustainable CO2. The pay back on power factor correction is most of the time very fast and attractive.